MINI ESC AND MOTOR COMBO FOR GT10DT

Product Specification

Key Features

• Waterproof
• Programmable:
  • Battery Type: NiMH or LiPo
  • End Points Calibration
  • ESC Modes:
    • Forward/Reverse with Smart Brake
    • Forward Only with Brake
    • Crawler Mode
• Thermal Protection
• Stall Protection
• Over/Under Voltage Protection

LED Indicators

• Power On:

  • Flashing Green: NiMH
  • Flashing Red: LiPo

• Normal Operation:

  • Green LED On: Forward/Reverse with Smart Brake
  • Flashing Green: Forward Only
  • Red + Green On: Crawler Mode
  • Red On: Full Speed Forward
  • Green On: Full Speed Reverse
  • Red + Green On: Brake

• Alerts:

  • Overheat: Flashing Red/Green + Beep
  • Motor Stalled: Flashing Red 3 times + Beep
  • Battery Over Voltage: Slow Red Flash + Green Flash + Beep
  • Battery Under Voltage: ESC disables motor output

Programming Procedure

1. Set throttle to max and trimmer to center.
2. Hold throttle at max and power on ESC.
3. Release throttle when you hear a beep and see both LEDs flash.
4. Programming Options:
   • Battery Type: Toggle with throttle. 4 seconds to select.
   • End Points Calibration: Follow LED prompts.
   • Select ESC Mode: Display current mode, 4 seconds to select.

• Solid Green: Forward/Reverse with Smart Brake
• Flashing Green: Forward Only
• Red + Green: Crawler Mode

Electrical Specifications

• Forward Current: 380A max (38A continuous)
• Backward Current: 190A max (19A continuous)
• PWM Frequency: 1 kHz
• Operation Voltage: 4.8V - 8.4V
• BEC: 5.6V/1A max at 7.2V

Smart Brake

• Brakes when switching from Forward to Reverse or vice versa. Remains in brake mode until throttle returns to stop.